TM 5-3895-373-34
2.16
ENGINE REPLACEMENT - Continued.
A.
REMOVE Continued.
25.
TAG
AND
DISCONNECT
HARNESS
CONNECTORS
FROM
LEFT
AND
RIGHT
FORWARD WORK LIGHT CONNECTORS.
a.
Cut and remove tie wraps (92) securing harness
connectors (93) to mounting bracket (94).
b.
Tag and disconnect harness connectors (93)
from left and right forward work light connectors
(95).
c.
Remove hex head cap screw (96), lockwasher
(97), and ground wire (98) from mounting
bracket (94). Discard lockwasher.
d.
Replace hex head cap screw (96) back into
mounting bracket (94).
GO TO NEXT PAGE
2-92
