TM 5-3895-373-34
2.16
ENGINE REPLACEMENT - Continued.
A.
REMOVE Continued.
2.
REMOVE MUFFLER SUPPORT BRACKET.
a.
With the help of another person to support the
weight of muffler support bracket (7), remove
socket head cap screws (8), flat washers (9),
lockwashers (10) and hex nuts (11). Discard
lockwashers.
b.
Remove muffler support bracket (7) from paving
machine.
3.
DISCONNECT ELECTRICAL CONNECTIONS
FROM STARTER.
a.
Remove hex nut (12), slave cable (13), positive
battery cable (14), and wire 331 (15) from B
terminal on starter (16). Install hex nut back
onto terminal.
b.
Remove hex nut (17), lockwasher (18), wire 332
(19), and wire 166 (20) from S terminal on
starter. Discard lockwasher. Install hex nut
back onto terminal.
c.
Remove hex nut (21), lockwasher (22), and wire
333 (23) from starter mounting stud. Discard
lockwasher. Install hex nut back onto mounting
stud.
GO TO NEXT PAGE
2-84
