TM 5-3895-373-34
A.
REMOVE Continued.
4.
DISCONNECT ELECTRICAL CONNECTIONS
FROM ALTERNATOR.
a.
Remove hex nut (24), lockwasher (25), and wire
328 (26) from B+ terminal on alternator (27).
Discard lockwasher. Install hex nut back onto
terminal.
b.
Remove hex nut (28), lockwasher (25), wire 329
(29), and wire 160 (30) from D+ terminal of
alternator (27). Discard lockwasher. Install hex
nut back onto terminal.
c.
Disconnect wire 102 (31) from W terminal on
alternator.
d.
Remove self-locking hex nut (32) and DCA
ground wire 330 (33) from pivot bolt of alternator
(27). Temporarily reinstall nut back onto
alternator pivot bolt. This nut will need to be
replaced with a new nut at reassembly.
GO TO NEXT PAGE
2-85
