TM 5-3895-373-34
2.75
REPLACE EXTENSION SCREED VIBRATOR COMPONENTS - Continued
A.
REMOVE.
NOTE
Left and right side extension screed
vibrators are mirror images of each
other. This task describes repair of
right vibrator only.
1.
REMOVE MOTOR MOUNT, RETAINER PLATE,
AND BEARING PLATE.
a.
Remove socket head cap screws (1) and
lockwashers (2). Discard lockwashers.
b.
Remove motor mount (3) from vibrator housing
(4).
c.
Remove socket head cap screws (5) and
lockwashers (6). Discard lockwashers.
d.
Remove retainer plate (7).
e.
Remove bearing plate (8), spacer (9), drive shaft
(10), and eccentric shaft (I 11) from vibrator
housing (4).
f.
Remove spring pins (12) and eccentric shaft (11)
from drive shaft (10). Discard spring pins.
g.
Remove spacer (9) and bearing plate (8) from
drive shaft (10).
GO TO NEXT PAGE
2-1068
