TM 5-3895-373-34
2.75
REPLACE EXTENSION SCREED VIBRATOR COMPONENTS - Continued
B.
CLEAN - Continued.
Compressed air used for cleaning
purposes will not exceed 30 psi (207
kPa). Use only with effective chip
guarding
and
personal
protective
equipment (goggles/face shield and
gloves). Failure to take proper
precautions may result in severe
injury or loss of vision.
c.
Use 30 psi (207 kPa) maximum compressed air
to blow any foreign material from grooves,
threaded surfaces, and holes. Do not use
compressed air on bearings.
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using.
Avoid contact with eyes. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
2.
CLEAN THREADS OF SOCKET HEAD CAP
SCREWS WITH THREAD LOCKING COMPOUND
SOLVENT.
C.
INSPECT.
1.
INSPECT BEARINGS FOR WEAR OR DAMAGE.
a.
Spin bearings by hand.
b.
If bearings do not spin freely, or if radial free play
is detected, replace bearings.
GO TO NEXT PAGE
2-1070
