TM 5-3895-373-34
2.71
REPLACE MAIN AND EXTENSION SCREED PLATES - Continued.
B.
REMOVE - Continued.
NOTE
When removing screed plates from
beneath screeds, ensure all shims,
plate spacers, and spacers remain
with corresponding studs. Shims,
plate spacers, and spacers will be
transferred to replacement screed
plates in the same corresponding
locations.
g.
Check for shims and plate spacers sticking
to bottom of screed frame. Remove
sticking shims and plate spacers from
screed frame and place on corresponding
studs.
h.
With screed resting on cribbing, with the
help of two persons, remove screed plate
from beneath screed frame. Ensure all
spacers (23 through 26), shims, and plate
spacers remain with corresponding studs.
i.
Ensure
all
shims,
plate
spacers,
and
spacers are in correct locations and install
flat washers (5) and self-locking nuts (4) to
secure them while performing steps in step
C.
GO TO NEXT PAGE
2-1028
