TM 5-3895-373-20
11.4.
REPLACE OPERATOR CONTROL CONSOLE SUPPORT FRAME - Continued.
B.
INSTALL - Continued.
f.
Align mounting holes on handrails (19) to
the holes on console supports (8 and 9).
g.
With the help of another person, install
console mounting frame (11), hex head cap
screws (18), flat washers (17), handrails
(19), and self-locking hex nuts (16). Do not
tighten at this time.
h.
Install hex head cap screw (14), flat
washers (13), hanger (15), and self-locking
hex nut (12). Do not tighten at this time.
i.
Secure console supports (8 and 9) by
tightening hex head cap screws (20 and 22)
to 90 lb-ft (122 N•m).
GO TO NEXT PAGE
11-38
