TM 5-3895-373-20
C.
INSTALL - Continued.
g.
With the help of another person, position
deck (3) between seat support weldments.
Lower deck support (7) if necessary, by first
loosening hex head cap screw (12).
WARNING
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
h.
Install flat washers (2) onto hex head cap
screws
(1)
and
apply
thread
locking
compound (Item 12, Appendix C) to threads
of hex head cap screws.
i.
Secure deck (3) to seat weldments with hex
head cap screws (1).
j.
Tighten hex head cap screws (1) to 37 lb-ft
(50 N•m).
k.
Loosen hex head cap screw (12) and adjust
deck support (7) to fit snug against bottom
of deck (3).
1.
Apply thread locking compound (Item 12,
Appendix C) to threads of hex head cap screw
(4).
m.
Secure deck (3) to deck support (7) with
hex head cap screw (4), flat washer (6),
and hex nut (5).
n.
Tighten hex nut (5) to 37 Ib-ft (50 N•m).
o.
Remove hex head cap screw (12) and flat
washer (13).
p.
Install flat washer (13) on hex head cap
screw
(12).
Apply
thread
locking
compound (Item 12, Appendix C) to threads
of cap screw.
q.
Install hex head cap screw (12) with flat
washer (13). Tighten hex head cap screw
to 37 lb-ft (50 N•m).
END OF TASK
11-33
