TM 5-3895-373-20
B.
INSTALL - Continued.
2.
INSTALL OPERATOR CONTROL CONSOLE
AND GUIDE SHAFT.
a.
Support operator control console (1). Slide
guide
shaft
(2)
into
operator
control
console.
b.
Lock the operator control console at the
center position with control console brake
(3).
WARNING
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
c.
Clean threads of hex head cap screws (4)
with thread locking compound solvent.
d.
Wipe hex head cap screws (4) dry with a
cleaning cloth.
e.
Install washers (5) onto hex head cap
screws (4).
WARNING
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
f.
Apply thread locking compound to threads
of hex head cap screws (4).
g.
With the help of two persons, lift and place
guide shaft (2) and operator control console
(1) onto the top of console supports (8 and
9). Ensure caster wheel on operator control
console is positioned against top of console
mounting frame (11).
h.
Install hex head cap screws (4), and clamp
caps (6 and 7). Tighten cap screws to 90
lb-ft (122 N•m).
i.
Install bumpers (10) onto clamp caps (6
and 7).
GO TO NEXT PAGE
11-39
