TM 5-3895-373-20
11.3.
REPLACE WALKWAYS, SCREED GUARD PLATES, AND SCREED HANDRAIL - Continued.
C.
INSTALL - Continued.
d.
Loosen hex jam nut (86).
e.
Place fire extinguisher into fire extinguisher
bracket (21).
f.
Close locking bracket (87) around fire
extinguisher. If the locking bracket does
not fit around the fire extinguisher, loosen
hex nut (88) and then tighten hex jam nut
(86). If the locking bracket is loose around
the fire extinguisher, back off hex nut (88).
Tighten hex jam nut (86), then tighten hex
nut (88).
6.
INSTALL SCREED STEPS.
a.
Position screed steps (19) to align the hinge
pins with the hinges.
b.
With screed steps (19) full back, slide the
steps to the left, so the hinge pins fit into
the hinges.
c.
Lift and push screed steps (19) forward until
fully seated.
GO TO NEXT PAGE
11-30
