TM 5-3895-373-20
7.12.
REPLACE/REPAIR WORK LIGHTS- Continued.
B.
REPAIR.
1.
REMOVE BULB.
a.
Remove machine screws (10) and bezel (11).
b.
Pull light unit (12) as far as possible from
housing (13) without putting tension in the wiring.
c.
Unplug bulb lead wire from wire harness
connector (14) and remove connector from
bracket on back of light unit (12).
d.
Squeeze bulb retaining clip ends together and
hinge down to release bulb (15).
e.
Remove and discard quartz halogen bulb (15).
GO TO NEXT PAGE
7-104
