TM 5-3895-373-20
B.
REPAIR - Continued.
2.
REMOVE WIRE HARNESS CONNECTOR.
a.
Remove machine screw (16) and slide outer
wireholder (17) away from rubber grommet (18).
b.
Pull rubber grommet (18) and inner wireholder
(19) through the back of housing (13).
c.
Tag wire harness (20) and remove wire harness
connector (14) using a removal tool.
d.
Remove wire harness (20) from housing (13).
e.
Use wire cutters and remove wire terminals (21)
from wire harness (20) by cutting the wire at the
base of the terminal. Discard wire blade
terminals.
f.
Slide inner wireholder (19), rubber grommet (18),
and outer wireholder (17) from wire harness
(20).
GO TO NEXT PAGE
7-105