TM 5-3895-373-20
7.11.
REPLACE/REPAIR VOLTAGE TRANSFORMER.
This task covers:
a.
Disconnect
b.
Repair
c.
Remove
d.
Install
e.
Connect
INITIAL SETUP
Tools:
General mechanics automotive tool kit
(Item 54, Appendix E)
Crowfoot wrench (Item 60, Appendix E)
Hex head driver socket (Item 45, Appendix E)
Socket wrench set (Item 70, Appendix E)
Torque wrench, 0 to 300 lb-ft (O to 407 N-m)
(Item 66, Appendix E)
Torque wrench, 5 to 150 lb-in (0,6 to 17 Nm)
(Item 69, Appendix E)
Materials/Parts:
Electrical insulating varnish (Item 32, Appendix C)
Tags (Item 27, Appendix C)
Thread locking compound (Item 13, Appendix C)
Thread locking compound (Item 12, Appendix C)
Thread locking compound solvent (Item 25, Appendix C)
Fuse covers
Lockwashers
Stamped fuses
Voltage transformer
Personnel Required:
Two 62B construction equipment repairers. Second
person
needed to support voltage transformer during removal
and
installation.
References:
TM 5-3895-373-10
TM 5-3895-373-24P
Equipment Condition:
Rear top left access door open per TM 5-3895-373-10.
Left access cover removed per TM 5-3895-373-10.
GO TO NEXT PAGE
7-93