2. REMOVE SECONDARY LOCKS FROM CIRCUIT BREAKER TERMINALS

7.10. REPLACE/REPAIR RELAY AND CIRCUIT BREAKER ASSEMBLY

4. REMOVE CIRCUIT BREAKER QUICK DISCONNECT TERMINALS AND BUSS BAR FEMALE TERMINALS FROM CIRCUIT BREAKER HOLDERS

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
729

TM 5-3895-373-20 A. DISASSEMBLE - Continued. 2. REMOVE SECONDARY LOCKS FROM CIRCUIT BREAKER TERMINALS. a. Insert flat-blade connector remover from electrical connector repair tool kit into circuit breaker terminal (4). b. Pry locking tab on secondary lock (5) from ledge inside circuit breaker terminal by twisting flat- blade connector removal tool toward center of the terminal. c. With locking tab free, pull secondary lock (5) from bottom of circuit breaker holder (6). Discard secondary lock. 3. REMOVE SECONDARY LOCKS FROM RELAY TERMINALS. a. Insert flat-blade connector removal tool into relay terminal (7). b. Pry locking tab on secondary lock (8) from ledge inside terminal by twisting the flat-blade connector removal tool toward center of relay terminal (7). c. With locking tab free pull secondary lock (8) from bottom of relay holder (9). Discard secondary lock. GO TO NEXT PAGE 7-87

Privacy Statement
Press Release
Contact