TM 5-3895-373-20
6.2.
REPLACE RADIATOR AND RADIATOR SHROUD.
This task covers:
a. Remove
b. Install
INITIAL SETUP
Tools:
Personnel Required:
General mechanic’s automotive tool kit
Two 62B construction equipment repairers.
(Item 54, Appendix E)
Second person needed to lift radiator.
Hex head driver socket (Item 45, Appendix E)
Socket wrench set (Item 70, Appendix E)
References:
Torque wrench (Item 66, Appendix E)
TM 5-3895-373-10
TM 5-3895-373-24P
Materials/Parts:
Thread locking compound (Item 12 Appendix C)
Equipment Condition:
Thread locking compound solvent (Item 25, Appendix C)
Hydraulic oil cooler removed per paragraph 8.2.
Lockwashers
Drain engine coolant per paragraph 2.23.3.
Radiator
Radiator shroud
A.
REMOVE.
1.
REMOVE RADIATOR.
NOTE
Due to tight spacing of radiator
brackets, a 3/8 in. drive
socket
wrench
set
is
recommended
for
removing and installing radiator and
shroud.
a.
Loosen hose clamps (1) and disconnect
coolant hoses (2 and 3) from radiator (4).
GO TO NEXT PAGE
6-2
