TM 5-3895-373-20
A.
REMOVE - Continued.
b.
Remove hex head cap screws (5 and 8),
lockwashers (6 and 9), and flat washers (7
and 10). Discard lockwashers.
c.
Remove hex nuts (11), flat washers (12),
hex head cap screws (13), lockwashers
(14), flat washer (15), and radiator bracket
(16). Discard lockwashers.
d.
Make sure hydraulic hoses are clear of
mounting brackets (23 and 24).
To avoid personal injury, use a hoist
or
get
assistance
when
lifting
components that weigh more than 50
lbs (23 kg). Ensure all chains, hooks,
slings, etc. are in good condition and
are of correct capacity. Ensure
hooks
are
positioned
correctly.
Always use a spreader bar when
necessary. The lifting hooks must
not be side loaded.
e.
With the help of another person, lift
radiator (4) through front top left access
door.
2.
DISASSEMBLE RADIATOR AND RADIATOR
SHROUD.
a.
Remove hex head cap screws (17 and
20), lockwashers (18 and 21), and flat
washers
(19
and
22).
Discard
lockwashers.
b.
Remove mounting brackets (23 and 24)
and spacers (25).
GO TO NEXT PAGE
6-3
