TM 5-3895-373-20
6.2.
REPLACE RADIATOR AND RADIATOR SHROUD - Continued.
A.
REMOVE - Continued.
c.
Use a hex head driver socket and remove
socket
head
cap
screws
(26)
and
mounting plates (27 and 28). Mark
mounting plates L and R for proper
position on installation.
d.
Remove hex head cap screws (29),
lockwashers (30), flat washers (31), and
clamps (32). Discard lockwashers.
e.
Remove
clamps
(32)
from
radiator
overflow hose (33).
f.
Remove radiator shroud (34).
B.
INSTALL.
1.
ASSEMBLE RADIATOR AND RADIATOR
SHROUD.
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
a.
Clean threads of socket head cap screws
(26) and hex head cap screws (29) with
thread locking compound solvent.
b.
Install radiator shroud (34).
c.
Install lockwashers (30) and flat washers
(31) onto hex head cap screws (29).
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush with water and
get immediate medical attention.
d.
Apply thread locking compound to threads
of hex head cap screws (29).
GO TO NEXT PAGE
6-4
