TM 5-3895-373-20
A.
REMOVE - Continued.
b.
Remove oil filter element (1) with oil filter
removal tool.
c.
Pour waste oil from oil filter element (1)
into a drip pan.
d.
Place a drip pan below coolant hoses (2).
CAUTION
Tag coolant hoses for reassembly. If
hoses are not installed correctly, flow
of coolant will be obstructed.
e.
Loosen hose clamps (3) and remove
coolant hoses (2).
f.
Dispose of waste oil, coolant, and oil filter
element
in
accordance
with
local
procedures.
g.
Remove connector (4) and engine oil
cooler (5).
h.
Remove and discard gasket (6).
2.
REMOVE STRAINER HEAD.
a.
Remove hex head cap screws (7),
lockwashers (8), and flat washers (9).
Discard lockwashers.
b.
Remove strainer head (10). Remove and
discard gasket (11).
NOTE
Do not remove connector unless
damaged.
Connector
must
be
removed with pliers and threads may
be damaged.
c.
If connector (12) is damaged, unscrew
and
remove
connector
using
pliers.
Discard
connector.
GO TO NEXT PAGE
3-9
