TM 5-3895-373-20
B.
CLEAN - Continued.
2.
CLEAN CAP SCREW THREADS.
WARNING
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
a.
Use thread locking compound solvent to
clean threads of cap screws.
b.
Dry with a clean, lint-free cloth.
C.
INSTALL.
1.
INSTALL STRAINER HEAD.
WARNING
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
a.
Install lockwashers (8) and flat washers
(9) on hex head cap screws (7). Apply
thread locking compound to threads of cap
screws.
b.
Install gasket (11) and strainer head (10)
with hex head cap screws (7).
c.
Evenly tighten hex head cap screws (7) to
66 lb-ft (90 N.m).
NOTE
If a new connector must be installed,
install
and
tighten
connector
by
hand. Use of any tools on connector
will damage threads.
d.
Install and tighten connector (12) by hand.
GO TO NEXT PAGE
3-11
