TM 5-3895-373-20
2.23.10.
REPLACE HYDRAULIC RETURN FILTER ELEMENT.
This task covers:
a.
Remove
b.
Install
INITIAL SETUP
Tools:
References:
General mechanics automotive tool kit
TM 5-3895-373-24P
(Item 54, Appendix E)
Drip pan (Item 28, Appendix E)
Equipment Condition:
Oil filter removal tool (Item 36, Appendix E)
Left access cover removed per TM 5-3895-373-10.
O-ring tool (Item 52, Appendix E)
Materials/Parts:
Cleaning solvent (Item 24, Appendix C)
Hydraulic oil (Item 18, Appendix C)
Lint-free cloth (Item 8, Appendix C)
Hydraulic return fluid filter element
A.
REMOVE.
WARNING
Cleaning solvent, P-D-680, is TOXIC
and flammable. Wear protective
goggles and gloves. Use only in a
well ventilated area. Avoid contact
with skin, eyes, and clothes, and do
not breathe vapors. Keep away from
heat or flame. Never smoke when
using solvent; the flashpoint for Type
III cleaning solvent is 200°F (93,3°C).
Failure to do so may result in injury
or death to personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
1.
USE CLEANING SOLVENT AND LINT-FRE
CLOTH
TO
CLEAN
HYDRAULIC
RETUR]
FILTER ASSEMBLY (1).
GO TO NEXT PAGE
2-426