TM 5-3895-373-20A.REMOVE - Continued.WARNINGHydraulic oil can be moderatelyflammable and can be an irritant tothe skin, eyes, and respiratorysystem. Avoid prolonged exposure.Eye protection and rubber glovesmust be worn when working withhydraulic oil.2.PLACE A DRIP PAN UNDER HYDRAULICRETURN FILTER ASSEMBLY.3.USE AN OIL FILTER REMOVAL TOOL TOREMOVE HYDRAULIC RETURN FILTERELEMENT (2). DISCARD HYDRAULICRETURN FLUID FILTER ELEMENT ANDEXCESS HYDRAULIC OIL IN ACCORDANCEWITH LOCAL PROCEDURES.CAUTIONUse caution when removing sealsand preformed packings. Scratchedor dented seal grooves can causebypass leakage. Do not useexcessive force when removing sealsand preformed packings. Use an o-ring tool to remove seals andpreformed packings.4.USE AN O-RING TOOL, AND REMOVE ANDDISCARD GASKET (3).B.INSTALL.WARNINGCleaning solvent, P-D-680, is TOXICand flammable. Wear protectivegoggles and gloves. Use only in awell ventilated area. Avoid contactwith skin, eyes, and clothes, and donot breathe vapors. Keep away fromheat or flame. Never smoke whenusing solvent; the flashpoint for TypeIm cleaning solvent is 200°F (93,3°C).Failure to do so may result in injuryor death to personnel.If personnel become dizzy whileusing cleaning solvent, immediatelyget fresh air and medical help. Ifsolvent contacts skin or clothes,flush with cold water. If solventcontacts eyes, flush eyes with waterand get immediate medical attention.1.USE CLEANING SOLVENT AND LINT-FREECLOTH TO CLEAN HYDRAULIC RETURNFILTER HEAD (4).GO TO NEXT PAGE2-427
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
