15.18. REPAIR TWO FOOT AUGER AND FENDER EXTENSION.

15.17. REPLACE/REPAIR FEED LIMIT SWITCH PADDLE ASSEMBLY - Continued

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
1147

TM 5-3895-373-20 15.18. REPAIR TWO FOOT AUGER AND FENDER EXTENSION. This task covers: a. Disassemble b. Clean c. Inspect d. Assemble INITIAL SETUP: Tools: References: General mechanic's automotive tool kit LO 5-3895-373-12 (Item 54, Appendix E) TM 5-3895-373-10 Socket wrench adapter (Item 2, Appendix E) TM 5-3895-373-24P Torque wrench, 0 to 600 lb-ft (Item 67, Appendix E) Torque wrench, 0 to 175 lb-ft (Item 68, Appendix E) Equipment Condition: Wire scratch brush (Item 6, Appendix E) 2 ft auger and fender extension removed per TM 5-3895-373-10. Materials/Parts: Cleaning cloth (Item 7, Appendix C) Cleaning solvent (Item 24, Appendix C) Grease (Item 15, Appendix C) Pipe sealant (Item 22, Appendix C) Thread locking compound (Item 13, Appendix C) Thread locking compound (Item 12, Appendix C) Thread locking compound solvent (Item 25, Appendix C) 1 ft extension shaft 2 ft extension shaft Bearing unit Extension fenders Hemi auger flights Lockwashers Quarter auger flights Teflon flat washers NOTE There is a left hand and a right hand 2 ft auger and fender extension for the paving machine. This procedure refers to the right hand auger and fender extension. Procedure is identical for left hand auger and fender extension. Right hand auger and fender extension is shown in this procedure. GO TO NEXT PAGE 15-125

Privacy Statement
Press Release
Contact