2. INSTALL STRIKEOFF PLATES

C. INSTALL - Continued. - TM-5-3895-373-20_1138

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
1129

TM 5-3895-373-20 C. INSTALL - Continued. f. Adjust height of prestrike plate (6) by tightening or loosening self-locking nuts (4) on lock pins (10). Adjust until bottom edge of prestrike plate is 1/4 in. (6,4 mm) above the ground along entire length. g. Tighten self-locking nuts (7) to 40 Ib-ft (54 N•m). 2. INSTALL STRIKEOFF PLATES. a. Install strikeoff plate (3), flat washers (2), and self-locking nuts (1). Do not tighten self-locking nuts. GO TO NEXT PAGE 15-107

Privacy Statement
Press Release
Contact