TM 5-3895-373-20
B.
CLEAN.
Cleaning solvent, P-D-680, is TOXIC
and flammable. Wear protective
goggles and gloves. Use only in a
well ventilated area. Avoid contact
with skin, eyes, and clothes, and do
not breathe vapors. Keep away from
heat or flame. Never smoke when
using solvent; the flashpoint for
Type III cleaning solvent is 200°F
(93,30C). Failure to do so may result
in injury or death to personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
1.
USE A CLEANING CLOTH SOAKED WITH
CLEANING
SOLVENT
TO
CLEAN
COMPONENTS NOT BEING REPLACED.
ALLOW SOLVENT TO REMAIN ON PAVING
MATERIAL LONG ENOUGH TO SOFTEN UP
PAVING MATERIAL RESIDUE.
2.
USE A WIRE SCRATCH BRUSH TO REMOVE
PAVING MATERIAL AS REQUIRED. MAKE
SURE ALL OLD PAVING MATERIAL IS
REMOVED FROM GUIDE BAR SLIDE AND
PRESTRIKE PLATE SLIDE.
3.
WIPE COMPONENTS DRY WITH A CLEAN
CLEANING CLOTH.
4.
DISPOSE OF CONTAMINATED CLEANING
SOLVENT IN ACCORDANCE WITH LOCAL
PROCEDURES.
GO TO NEXT PAGE
15-105
