TM 5-3895-373-20
E.
INSTALL Continued.
2.
INSTALL
EXTENSION
SCREED
BURNER
CHAMBER ASSEMBLY.
NOTE
When installing the burner chamber
assembly, make sure that glow plug
is pointing out toward the rear of
paving machine.
a.
Position gasket
(21)
and
burner
chamber
assembly (19) onto the paving machine.
b.
Connect flexible pipe (20) to burner chamber
assembly (19).
c.
Install lockwashers (18) onto hex head cap
screws (17).
Sealing compound can cause eye
damage. Wear safety goggles/glasses
when using. Avoid contact with eyes.
If compound contacts eyes, flush
eyes with water and get immediate
medical attention.
d.
Apply sealing compound to threads of hex head
cap screws (17).
e.
Install hex head cap screws (17) into burner
chamber assembly (19). Tighten cap screws to
37 Ib-ft (50 N•m).
f. Apply sealing compound to threads of clamp
(16).
g. Install clamp (16) and hex nuts (15). Tighten hex
nuts evenly to 9 lb-ft (12 N•m).
GO TO NEXT PAGE
14-45
