E. INSTALL Continued - TM-5-3895-373-20

14.5. REPLACE BURNER CHAMBER AND FUEL SPRAY NOZZLE - Continued - TM-5-3895-373-20_1004

14.5. REPLACE BURNER CHAMBER AND FUEL SPRAY NOZZLE - Continued - TM-5-3895-373-20_1006

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
997

TM 5-3895-373-20 E. INSTALL Continued. Hydraulic fitting sealant can cause eye damage or skin irritation. Wash after skin contact. Wear safety goggles/glasses when using. Avoid contact with eyes or skin. If sealant contacts eyes, flush eyes with water and get immediate medical attention. m. Apply hydraulic fitting sealant to threads of elbow (9). n. Connect hose (8) to elbow (9). Electrical insulating varnish fumes can be harmful if inhaled. Use only in a well ventilated area. Avoid prolonged exposure to fumes. If personnel become dizzy or drowsy during use, get immediate medical attention. o. Install lead wire (6) and terminal nut (5) onto glow plug (7). Tighten terminal nut. Apply electrical insulating varnish to glow plug terminal. p. Use tie wraps as necessary to secure wiring and hoses away from the burner chamber assembly. GO TO NEXT PAGE 14-47

Privacy Statement
Press Release
Contact