TM 5-3895-373-10
Fuel is slippery and can cause falls.
To avoid injury, wipe up spilled fuel
with rags.
i.
Use a cleaning cloth (Item 1, Appendix D) to
wipe up any spilled diesel fuel and replace fuel
cap. Dispose of contaminated cleaning cloth in
accordance with local procedures.
j.
Close left access door per paragraph 2.24.2.
3.3.4 Adding Hydraulic Oil.
a.
Park the paving machine on level ground. Shut
off engine and remove key from ignition switch
per paragraph 2.11.
b.
move right access cover and open center top
right access door per paragraphs 2.24.5 and
2.24.1.
CAUTION
Cleanliness is extremely important
when adding hydraulic oil. Add
hydraulic oil in a clean area protected
from blowing dust, dirt, and other
debris. Failure to do so may result in
excessive component wear or failure.
c.
Use a cleaning cloth (Item 1, Appendix D) and
wipe dirt and any foreign material from area on
top of hydraulic reservoir (1) around hydraulic
reservoir cap (2).
d.
Unscrew hydraulic reservoir cap and set cap
aside.
Hydraulic
oil
can
be
moderately
flammable and can be an irritant to the
skin, eyes, and respiratory system.
Avoid
prolonged
exposure.
ye
protection and rubber gloves must be
worn when working with hydraulic oil.
e.
Check for any foreign material accumulated in
filler neck strainer (3). Notify Unit Maintenance if
any foreign material is observed.
f.
Add hydraulic oil (Item 6, Appendix D) to
hydraulic reservoir until oil level in reservoir is
near top of combination sight liquid indicator (4).
g.
Replace
hydraulic
reservoir
cap
and
turn
clockwise until tight.
h.
Wipe up any spilled hydraulic oil with a cleaning
cloth (Item 1, Appendix D). Dispose of
contaminated cleaning cloth in accordance with
local procedures.
i.
Install right access cover and close center top
right access door per paragraphs 2.24.6 and
2.24.2.
3-22
