TM 5-3895-373-10
o.
Connect feed limit switch connector (1) to the
connector on the rear wall of the tractor.
p.
Start paving machine per paragraph 2.10
q.
Place throttle control switch to "MAX" position.
r.
Place screed lift switch to the up, RAISE
position. Raise screed fully up.
s.
Remove wood support blocks from under each
end of main screed.
t.
Retract both left and right extension screeds per
paragraph 2.19.
u.
Ensure screed travel lock valve is open.
v.
Place screed lift switch to the down, FLOAT
position. Lower the screed until the screed rests
on the ground.
w.
Shut down paving machine per paragraph 2.11,
steps a through g.
2-94
