TM 5-3895-385-23-3
0444
Switch Function Status Right Keypads
Figure 5. Right Keypads Switch Function Status Window.
NOTE
Switch status defaults to OFF (red) until a push-button switch is selected. Once a push-button
switch has been selected, the corresponding status box (Table 1) will display ON (green) if the
selected push-button switch is operating properly.
1. Select RIGHT KEYPADS from Plus One Diagnostic Navigator box (Figure 5, Item 1) on MSD (laptop).
Keypad switch function Plus One Graphical Overview window (Figure 5, Item 2) will display for right control
pedestal (not shown).
2. Press switch/button and hold for 2 seconds to be tested on keypad (Figure 2, Item 7). Verify corresponding
switch (Table 1) status box on Plus One Graphical Overview window displays ON (green).
3. Select and verify additional push-button switches, as necessary, to verify switch operation and eliminate or
identify as a possible fault.
END OF TASK