TM 5-3895-385-23-3
0444
PLUS ONE SERVICE TOOL USAGE
Switch Function Status Engine Start Enable
Figure 3. Propel Switch Function Status Window.
1. Select PROPEL from Plus One Diagnostic Navigator window (Figure 3, Item 1). Switch function Graphical
Overview window (Figure 3, Item 2) will display.
NOTE
If a function, such as "EngStartEnabel," status box displays OFF (red), it indicates the function is
not activated or not operating properly.
2. Verify "EngStartEnable" status box on Plus One Graphical Overview window (Figure 3, Item 2) displays ON
(green). If not, further troubleshooting will be required (WP 0004, Vol 1).
END OF TASK