TM 5-3895-385-23-2
0419
Conveyor Drive Motor Removal -- Continued.
Figure 4. Conveyor Drive Motor and Torque Hub -- Removal.
13. Remove bolt (Figure 4, Item 11), lock washer (Figure 4, Item 10), and sprocket (Figure 4, Item 9) from
conveyor drive torque hub (Figure 4, Item 2). Discard lock washer.
14. Remove four bolts (Figure 4, Item 12), lock washers (Figure 4, Item 3), nuts (Figure 4, Item 4), and conveyor
adjustment slide (Figure 4, Item 1) from conveyor drive torque hub (Figure 4, Item 2). Discard lock washer.
15. Remove two bolts (Figure 4, Item 7), lock washers (Figure 4, Item 8), conveyor drive hydraulic motor (Figure
4, Item 6), and O-ring (Figure 4, Item 5) from conveyor drive torque hub (Figure 4, Item 2). Discard lock
washers and O-ring.
END OF TASK
Conveyor Torque Hub Service
Drain Conveyor Torque Hub Oil
1. Remove conveyor drive assembly (perform steps 1 12 of Conveyor Drive Motor Removal task).
2. Position drain pan below plug (Figure 5, Item 3).
3. Remove fill plug (Figure 5, Item 1).