TM 5-3895-385-23-2
0419
Conveyor Drive Motor Removal -- Continued.
1. Start BMPM engine (TM 5-3895-385-10).
WARNING
Be sure area surrounding BMPM is clear of personnel and objects before moving the unit,
opening hopper wings, lowering screed, or deploying screed extensions. Sound unit horn before
moving unit from stopped position. Turn on beacon when unit is in motion. Failure to comply may
cause injury or death to personnel or damage to equipment.
2. Run the conveyors until the chain master link (Figure 1, Item 3) can be accessed (TM 5-3895-385-10).
3. Stop BMPM engine (TM 5-3895-385-10).
4. Set BATTERY DISCONNECT switch to OFF (TM 5-3895-385-10).
5. Allow hydraulic system to cool (TM 5-3895-385-10).
6. Loosen two jam nuts (Figure 1, Item 1).
7. Lower drive motor using tension bolts (Figure 1, Item 2).
8. Remove two cotter pins (Figure 1, Item 4) and chain master link (Figure 1, Item 3) from chain. Discard cotter
pins.
9. Remove chain from sprocket (Figure 1, Item 5).
0419-3
