TM 5-3895-385-23-2
0419
Drain Conveyor Torque Hub Oil -- Continued.
Figure 5. Conveyor Torque Hub -- Service.
4. Remove drain plug (Figure 5, Item 2).
5. Allow all oil to drain completely from conveyor torque hub at drain plug (Figure 5, Item 2).
6. Install drain plug (Figure 5, Item 2).
7. Fill oil (perform steps 1 4 of Fill Conveyor Torque Hub Oil task).
8. Install conveyor drive assembly (perform steps 4 10 of Conveyor Drive Motor Installation task).
Fill Conveyor Torque Hub Oil
1. Refer to LO 5-3895-385-13 for lubrication information.
2. Position drain pan below check plug (Figure 5, Item 3).
3. Remove fill plug (Figure 5, Item 1) and check plug (Figure 5, Item 3).
4. Fill conveyor torque hub at fill plug (Figure 5, Item 1) to the level of the check plug (Figure 5, Item 3).
5. Install fill plug (Figure 5, Item 1) and check plug (Figure 5, Item 3).
END OF TASK
Conveyor Drive Motor Installation
1. Install conveyor drive hydraulic motor (Figure 4, Item 6), new O-ring (Figure 4, Item 5), two bolts (Figure 4,
Item 7), and new lock washers (Figure 4, Item 8) onto conveyor drive torque hub (Figure 4, Item 2).
2. Install four bolts (Figure 4, Item 12), new lock washers (Figure 4, Item 3), nuts (Figure 4, Item 4), and
conveyor adjustment slide (Figure 4, Item 1) onto conveyor drive torque hub (Figure 4, Item 2).
3. Install bolt (Figure 4, Item 11), lock washer (Figure 4, Item 10), and sprocket (Figure 4, Item 9) onto conveyor
drive torque hub (Figure 4, Item 2).
