TM 5-3895-385-23-2
0402
Cutoff Arm Removal
Figure 4. Cutoff Arm and Bracket -- Removal.
1. Remove two bolts (Figure 4, Item 1), lock washers (Figure 4, Item 2), and cutoff arm bracket (Figure 4, Item
3) from mounting block (Figure 4, Item 4). Discard lock washers.
2. Remove inside cutoff arm (Figure 4, Item 5) from auger sprocket shaft (Figure 4, Item 6).
END OF TASK
Cutoff Arm Installation
CAUTION
When installing the cutoff arm bracket, be sure the longer side of the bracket wraps to the back
side of the auger tube, toward the hopper. Failure to comply may cause damage to equipment.
Install cutoff arm (Figure 4, Item 6), two bolts (Figure 4, Item 1), new lock washers (Figure 4, Item 2), and cutoff
arm bracket (Figure 4, Item 3) onto mounting block (Figure 4, Item 4).
END OF TASK