TM 5-3895-385-23-2
0379
Left Side Joystick Wiring Harness Removal -- Continued.
CAUTION
Tag and label all electric cables and connections prior to removal. Electric cables must be
installed correctly for proper operation. Failure to comply will cause damage to equipment.
1. Remove two screws (Figure 1, Item 4), and disconnect two red and black wires (Figure 1, Item 1) from +
contact on left joystick (Figure 1, Item 7) and + contact on right joystick (Figure 1, Item 10).
2. Remove two screws (Figure 1, Item 4) and disconnect two black wires (Figure 1, Item 3) and ground wires
(Figure 1, Item 6) from - contact on left joystick (Figure 1, Item 7) and - contact on right joystick (Figure 1, Item
10).
3. Remove screw (Figure 1, Item 4) and disconnect grey wire (Figure 1, Item 2) from A contact on right joystick
(Figure 1, Item 10).
4. Remove screw (Figure 1, Item 4) and disconnect light blue wire (Figure 1, Item 5) from A contact on left
joystick (Figure 1, Item 7).
5. Disconnect W7 J1 (Figure 1, Item 8) from W12 J11 (Figure 1, Item 9).
END OF TASK
Left Side Joystick Wiring Harness Installation
1. Connect W7 J1 (Figure 1, Item 8) to W12 J11 (Figure 1, Item 9).
2. Connect light blue wire (Figure 1, Item 5) to A contact on left joystick (Figure 1, Item 7), and install screw
(Figure 1, Item 4).
3. Connect grey wire (Figure 1, Item 2) to A contact on right joystick (Figure 1, Item 10), and install screw
(Figure 1, Item 4).
4. Connect two black wires (Figure 1, Item 3) and ground wires (Figure 1, Item 6) to - contact on left joystick
(Figure 1, Item 7) and - contact on right joystick (Figure 1, Item 10), and install two screws (Figure 1, Item 4).
5. Connect two red and black wires (Figure 1, Item 1) from + contact on left joystick (Figure 1, Item 7) and +
contact on right joystick (Figure 1, Item 10), and install two screws (Figure 1, Item 4).
END OF TASK
FOLLOW-ON TASK
1. Install platform control (WP 0262).
2. Install cable ties where necessary.
END OF TASK
END OF WORK PACKAGE
0379-3/4 blank
