TM 5-3895-385-23-2
FIELD MAINTENANCE
BITUMINOUS MATERIAL PAVING MACHINE (BMPM)
POWER WIRING HARNESS REMOVAL AND INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Personnel Required
General Mechanics Tool Kit (GMTK) (WP 0440, Vol
91L
3, Item 64)
Equipment Conditions
Materials/Parts
Engine hood assembly removed (WP 0433)
Lock washer (2) (WP 0439, Vol 3, Item 106)
Estimated Time to Complete Task
11.3 hr
Lock washer (4) (WP 0439, Vol 3, Item 114)
POWER WIRING HARNSS REMOVAL AND INSTALLATION
WARNING
NATO slave receptacle is electrically live at all times and is not protected by a fuse. This circuit is
only dead when the batteries are fully disconnected. Disconnect both batteries before performing
maintenance on the slave receptacle. Failure to comply may cause injury or death to personnel.
CAUTION
Tag and label all electric cables and connections prior to removal. Electric cables must be
installed correctly for proper operation. Failure to comply will cause damage to equipment.
NOTE
It will be necessary to remove cable ties from cables.
