TM 5-3895-385-23-2
0325
Cylinder Head Assembly Installation
Figure 6. Cylinder Head Assembly -- Installation.
CAUTION
Remove all carbon, dirt, debris, and burrs from gasket contact surfaces of engine block and
cylinder head assembly. Failure to comply will cause damage to equipment.
1. Install new cylinder head gasket (Figure 6, Item 3) onto engine block (Figure 6, Item 4) with TOP mark on
cylinder head gasket facing up.
WARNING
Cylinder head assembly weighs 136 lb (50.75 kg). Use a suitable lifting. Failure to comply may
cause injury or death to personnel.
CAUTION
Properly support the item being lifted. Failure to comply may cause damage to equipment.
2. Install cylinder head assembly (Figure 6, Item 2) onto engine block (Figure 6, Item 4) and cylinder head
gasket (Figure 6, Item 3).
3. Apply anti-seize compound to threads of 18 new cylinder head mounting bolts (Figure 6, Item 1).
4. Install 18 new cylinder head mounting bolts (Figure 6, Item 1) to cylinder head assembly (Figure 6, Item 2)
finger-tight.