TM 5-3895-385-23-2
0288
Left Hopper Wing Hydraulic Manifold Hoses Removal -- Continued.
CAUTION
Tag and label hydraulic hoses prior to removal. Hydraulic hoses must be installed correctly for
proper operation. Failure to comply may cause damage to equipment.
2. Disconnect hydraulic hose 9B (Figure 7, Item 8) and hydraulic hose 9A (Figure 7, Item 4) from tee fittings
(Figure 7, Items 6 and 7), and cap/plug hydraulic hoses and hydraulic fittings.
3. Remove two nuts (Figure 7, Item 12), flat washers (Figure 7, Item 11), bracket (Figure 7, Item 10), and spacer
(Figure 7, Item 9) from BMPM (Figure 7, Item 5).
4. Remove three bolts (Figure 7, Item 1), bracket (Figure 7, Item 2), four spacers (Figure 7, Item 3), hydraulic
hose 9B (Figure 7, Item 8), and hydraulic hose 9A (Figure 7, Item 4) from BMPM (Figure 7, Item 5).
END OF TASK
Left Hopper Wing Hydraulic Manifold Hoses Inspection
1. Inspect hydraulic hoses (Figure 7, Items 8 and 4) and fittings for cracks, holes, wear, or deformities. Replace
hydraulic hoses if damaged.
2. Inspect hydraulic fittings on tee fittings, manifold, and hoses for cracks, stripped threading, wear, or
deformities. Replace component if damaged.
END OF TASK
Left Hopper Wing Hydraulic Manifold Hoses Installation
1. Install three bolts (Figure 7, Item 1), bracket (Figure 7, Item 2), four spacers (Figure 7, Item 3), hydraulic hose
9B (Figure 7, Item 8), and hydraulic hose 9A (Figure 7, Item 4) onto BMPM (Figure 7, Item 5).
2. Install two nuts (Figure 7, Item 12), flat washers (Figure 7, Item 11), bracket (Figure 7, Item 10), and spacer
(Figure 7, Item 9) onto BMPM (Figure 7, Item 5).
3. Remove caps/plugs from all hydraulic hoses (Figure 7, Items 8 and 4) and hydraulic fittings.
4. Connect hydraulic hose 9B (Figure 7, Item 8) and hydraulic hose 9A (Figure 7, Item 4) onto tee fittings (Figure
7, Items 6 and 7).
5. Connect hydraulic hose 9B (Figure 6, Item 4) and hydraulic hose 9A (Figure 6, Item 5) onto 2-speed hydraulic
manifold (Figure 6, Item 8).
END OF TASK