TM 5-3895-385-23-2
0281
Tow Point Hydraulic Hose Removal -- Continued.
CAUTION
Tag and label hydraulic hoses prior to removal. Hydraulic hoses must be installed correctly for
proper operation. Failure to comply may cause damage to equipment.
1. Disconnect hydraulic hose 43A (Figure 1, Item 8) and hydraulic hose 44A (Figure 1, Item 6) from left tow point
hydraulic cylinder (Figure 1, Item 7).
2. Disconnect hydraulic hose 43A (Figure 1, Item 8) and hydraulic hose 44A (Figure 1, Item 6) from hopper side
of left bulkhead (Figure 1, Item 9).
3. Disconnect hydraulic hose 45B (Figure 1, Item 2) and hydraulic hose 45A (Figure 1, Item 4) from engine side
of left bulkhead (Figure 1, Item 9).
4. Disconnect hydraulic hose 45B (Figure 1, Item 2), hydraulic hose 45A (Figure 1, Item 4), hydraulic hose 42B
(Figure 1, Item 3), and hydraulic hose 42A (Figure 1, Item 5) from main manifold (Figure 1, Item 1).
5. Disconnect hydraulic hose 43B (Figure 1, Item 10) and hydraulic hose 44B (Figure 1, Item 11) from right tow
point hydraulic cylinder (Figure 1, Item 12).
6. Disconnect hydraulic hose 43B (Figure 1, Item 10) and hydraulic hose 44B (Figure 1, Item 11) from hopper
side of right bulkhead (Figure 1, Item 13).
7. Disconnect hydraulic hose 42B (Figure 1, Item 3) and hydraulic hose 42A (Figure 1, Item 5) from engine side
of right bulkhead (Figure 1, Item 13).
8. Cap/plug hydraulic hoses (Figure 1, Items 2, 3, 4, 5, 6, 8, 10 and 11) and hydraulic fittings.
END OF TASK
Tow Point Hydraulic Hose Inspection
1. Inspect hydraulic hoses (Figure 1, Items 2, 3, 4, 5, 6, 8, 10 and 11) and fittings for cracks, holes, wear, or
deformities. Replace hydraulic hoses if damaged.
2. Inspect hydraulic fittings on hydraulic cylinders, bulkheads, manifolds, and hoses for cracks, stripped
threading, wear, or deformities. Replace component if damaged.
END OF TASK
Tow Point Hydraulic Hose Installation
1. Remove caps/plugs from hydraulic hoses and hydraulic fittings.
2. Connect hydraulic hose 43A (Figure 1, Item 8) and hydraulic hose 44A (Figure 1, Item 6) onto left tow point
hydraulic cylinder (Figure 1, Item 7).
3. Connect hydraulic hose 43A (Figure 1, Item 8) and hydraulic hose 44A (Figure 1, Item 6) onto hopper side of
left bulkhead (Figure 1, Item 9).
4. Connect hydraulic hose 45B (Figure 1, Item 2) and hydraulic hose 45A (Figure 1, Item 4) onto engine side of
left bulkhead (Figure 1, Item 9).
5. Connect hydraulic hose 45B (Figure 1, Item 2), hydraulic hose 45A (Figure 1, Item 4), hydraulic hose 42B
(Figure 1, Item 3), and hydraulic hose 42A (Figure 1, Item 5) onto main manifold (Figure 1, Item 1).
6. Connect hydraulic hose 43B (Figure 1, Item 10) and hydraulic hose 44B (Figure 1, Item 11) onto right tow
point hydraulic cylinder (Figure 1, Item 12).
