TM 5-3895-385-23-1
FIELD MAINTENANCE
BITUMINOUS MATERIAL PAVING MACHINE (BMPM)
AUGER DOWN FAULT
INITIAL SETUP:
Test Equipment
References
Multimeter (WP 0440, Vol 3, Item 37)
WP 0373, Vol 2
Personnel Required
WP 0376, Vol 2
91L
WP 0401, Vol 2
Assistant
WP 0443, Vol 3
References
WP 0451, Vol 3
Equipment Conditions
WP 0312, Vol 2
Engine off (TM 5-3895-385-10)
Hydraulic oil cool (TM 5-3895-385-10)
TROUBLESHOOTING PROCEDURES
Table 1. Auger Down Fault Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. System fault indicated on fault
1. Start Bituminous Material Paving
screen.
Machine (BMPM) engine (TM 5-
3895-385-10).
2. Attempt to lower augers using
keypad (TM 5-3895-385-10).
3. Check fault screen for SCREED
1. If fault is found, proceed to WP
CONTROLLER OFFLINE fault.
2. If no fault is found, turn keyless
engine switch to the OFF
position (TM 5-3895-385-10),
and proceed to next malfunction.
2. Hydraulic solenoid malfunction.
1. Disconnect main manifold wiring
harness W10 J4 from auger
down solenoid (WP 0451, Vol 3,
Figure 27).
2. Turn keyless engine switch to
the AUX position (TM 5-3895-
385-10), but do not start engine.