TM 5-3895-385-23-1
0091
Table 1. Augers Fail to Lower Troubleshooting Procedures -- Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. Attach hydraulic pressure tester
(WP 0442, Vol 3) to hydraulic
pressure at hydraulic fitting ALA
on the main hydraulic manifold
(WP 0441, Vol 3, Figure 1).
3. Start BMPM engine (TM 5-3895-
385-10).
4. Check hydraulic pressure at
1. If hydraulic pressure reads a
hydraulic fitting ALA on the main
minimum of 1800 psi (12,410
hydraulic manifold (WP 0441, Vol
kPa), turn keyless engine switch
3, Figure 1) while pressing auger
to the OFF position, and
lower key on pedestal top (TM 5-
proceed to next malfunction.
3895-385-10).
2. If pressure reads below 1800 psi
(12,410 kPa), turn keyless
engine switch to the OFF
position, and replace auger
lower hydraulic solenoid (WP
0312, Vol 2).
6. Loss of hydraulic pressure at
1. Attach hydraulic pressure tester
left side auger lift hydraulic
(WP 0442, Vol 3) to hydraulic
cylinder.
hose 89 at left side auger lift
hydraulic cylinder (WP 0297, Vol
2).
2. Start BMPM engine (TM 5-3895-
385-10).
3. Press auger lower key on
pedestal top (TM 5-3895-385-
10).
4. Check hydraulic pressure (WP
1. If hydraulic pressure reads a
0442, Vol 3) at hydraulic hose 89
minimum of 1800 psi (12,410
at left side auger lift hydraulic
kPa), replace the left side auger
cylinder (WP 0297, Vol 2) while
lift hydraulic cylinder (WP 0408,
pressing auger lower key on
Vol 2).
pedestal top (TM 5-3895-385-
10).
2. If pressure reads below 1800
psi (12,410 kPa), replace
hydraulic hose 89 (WP 0297,
Vol 2).
0091-4
