TM 5-3895-385-10
0014
END GATE INSTALLATION -- CONTINUED.
Figure 4. End Gate.
WARNING
The end gate weighs 168 lb (76 kg). Four personnel are required to lift component. Failure to
comply may cause injury or death to personnel.
CAUTION
Properly support the item being lifted. Failure to comply may cause damage to equipment.
NOTE
It may be necessary to raise screed slightly in order to slide end gate on or off screed
extension.
It may be necessary to adjust the end gate tilt screw post for proper alignment.
4. Install the end gate (Figure 4, Item 1) onto screed extension (Figure 4, Item 2) with assistance.