TM 5-3895-385-10
0014
END GATE INSTALLATION
Figure 3. Screed Extension.
NOTE
The Bituminous Material Paving Machine (BMPM) is shipped without end gates attached.
The end gates must be installed prior to use. End gates must also be removed and installed
when installing or removing bolt-on extensions.
The procedure for installation and removal of the end gate is the same whether being
performed on the screed extension or bolt-on screed extension.
The procedure for installation and removal of the end gate is the same whether being
performed on the left side or right side. Left side shown.
1. Unpack end gate (WP 0023).
2. Remove two bolts (Figure 3, Item 5), lock washers (Figure 3, Item 6), and screed end gate bracket mount bar
(Figure 3, Item 1) from screed extension (Figure 3, Item 2), and discard lock washers.
3. Remove lock nut (Figure 3, Item 4) from screed extension bolt (Figure 3, Item 3), and discard lock nut.