TM 5-3895-385-10
0014
END GATE REMOVAL
Figure 1. End Gate.
1. Remove two bolts (Figure 1, Item 6), lock washers (Figure 1, Item 7), and screed end gate bracket mount bar
(Figure 1, Item 8) from screed extension (Figure 1, Item 2), and discard lock washers.
2. Remove lock nut (Figure 1, Item 5) from screed extension bolt (Figure 1, Item 3) and end gate depth screw
bracket (Figure 1, Item 4), and discard lock nut.
WARNING
The end gate weighs 168 pounds (lb) (76 kilograms (kg)). Four personnel are required to lift
component. Failure to comply may cause injury or death to personnel.
CAUTION
Properly support the item being lifted. Failure to comply may cause damage to equipment.
NOTE
It may be necessary to raise screed slightly in order to slide end gate on or off screed extension.
3. Remove end gate (Figure 1, Item 1) from screed extension (Figure 1, Item 2) with assistance.
