TM 5-3895-385-10
0006
STOPPING THE ENGINE -- CONTINUED.
1. Ensure the joysticks (Figure 2, Item 1) are in the neutral position.
2. Allow BMPM to come to a complete stop.
3. Ensure the run/stop toggle switches (Figure 2, Item 2) on both left and right control pedestal are switched to
the STOP position.
CAUTION
Engine is equipped with a turbocharger. Turbocharger generates heat during operation and must
cool prior to shutting the engine off. Failure to comply may cause damage to equipment.
4. Allow engine to idle for approximately 5 minutes to allow turbocharger to cool.
5. Turn keyless engine switch (Figure 2, Item 3) to the OFF position.
6. Set BATTERY DISCONNECT switch to OFF (WP 0004).
END OF TASK
FOLLOW-ON TASK
Perform After PMCS (WP 0013).
END OF TASK
0006-5