TM 5-3895-385-10
0006
STARTING THE ENGINE -- CONTINUED.
WARNING
Do not use ether as a starting aid for the engine. Engine has an intake air pre-heater. Using ether
may cause a fire or explosion. Failure to comply may cause injury or death to personnel.
CAUTION
Do not use ether as a starting aid for the engine. Engine has an intake air pre-heater. Using ether
may cause a fire or explosion. Failure to comply may cause damage to equipment.
6. Turn keyless engine switch (Figure 1, Item 2) clockwise to the AUX position.
CAUTION
Do not operate starter longer than 10 15 seconds. If the engine does not start, release keyless
engine switch to AUX position, and allow starter to cool 2 3 minutes. Failure to comply may
cause damage to equipment.
7. Turn keyless engine switch (Figure 1, Item 2) clockwise to the IGN position to engage the starter.
8. Release keyless engine switch (Figure 1, Item 2) back to the AUX position when engine starts.
NOTE
Engine warm up will give the hydraulic oil time to warm, providing for more efficient operation.
9. Allow engine to warm for approximately 10 minutes before moving BMPM.
END OF TASK
0006-3
