TM 5-3895-373-34
2.67
REPLACE MAIN SCREED FRAME - Continued.
A.
REMOVE - Continued.
8.
DISCONNECT AND
LAY
ASIDE
SCREED
BURNER MANIFOLD.
NOTE
Disconnect and lay aside only the screed burner
manifold from main screed frame being replaced. Right
hand screed burner manifold is shown in this procedure.
a.
Tag and disconnect screed burner solenoid
valve electrical connectors (64) from screed
harness electrical connectors (65).
WARNING
Fuel is very flammable and can
explode easily. To avoid serious
injury or death:
Always wear safety glasses/goggles
at all times.
Keep fuel away from open flame or
any spark (ignition source).
Keep at least a B-C fire extinguisher
within easy reach when working with
fuel or on a fuel system.
Do not work on fuel system when
engine is hot; fuel can be ignited by a
hot engine.
Post signs that read "NO SMOKING
WITHIN 50 FEET" when working with
open fuel lines or fuel tanks.
b.
Remove hose (66) from screed burner manifold
being removed.
c.
Remove bolts (67) and lockwashers (68).
Discard lockwashers.
d.
Pull main screed burner hose (69) from inside of
main screed fame. Coil hose and secure hose
with tie wraps.
e.
Coil extension screed burner hose (70) and
secure with tie wraps.
f.
Lift screed burner manifold (71) and hoses and
lay to one side, away from main screed frame
being replaced.
GO TO NEXT PAGE
2-936
