TM 5-3895-373-34
A.
REMOVE - Continued.
h.
Remove
assembled
drive
shaft
(11)
from
vibrator housing (7).
3.
REMOVE BURNER CHAMBER ASSEMBLY
FROM MAIN SCREED.
a.
Cut and remove tie wraps as required.
b.
Remove terminal nut (12) and lead wire (13)
from glow plug (14).
WARNING
Fuel is very flammable and can
explode easily. To avoid serious
injury or death:
Always wear safety glasses/goggles
at all times.
Keep fuel away from open flame or
any spark (ignition source).
Keep at least a B-C fire extinguisher
within easy reach when working with
fuel or any fuel system.
Post signs that read "NO SMOKING
WITHIN 50 FEET" when working with
open fuel lines or fuel tanks.
c.
Place a machinery wiping towel beneath hose
(15).
d.
Tag and disconnect hose (15) from elbow (16).
Plug hose and cap elbow.
GO TO NEXT PAGE
2-931
