TM 5-3895-373-34
2.66
REPLACE EXTENSION SCREED FRAME.
This task covers:
a. Remove
b. Clean
c.
Inspect
d. Install
INITIAL SETUP:
Tools:
Personnel Required:
General mechanic’s automotive tool kit
Two 62B construction equipment repairers. Second person
(Item 106, Appendix D)
needed for help in lifting and positioning components.
Drift punch (Item 70, Appendix D)
Heater gun (Item 51, Appendix D)
References:
Hex head driver socket (Item 86, Appendix D)
TM 5-3895-373-10
Hex nuts, 8 ea (Item 60, Appendix D)
TM 5-3895-373-20
Sling strap, 2 ea (Item 98, Appendix D)
TM 5-3895-373-24P
Hex head cap screws, 4 ea (Item 24, Appendix D)
Socket wrench adapter (Item 6, Appendix D)
Equipment Condition:
Socket wrench set (Item 135, Appendix D)
Screed fully lowered per TM 5-3895-373-10.
Straightedge (Item 27, Appendix C)
Extension screed plates removed per paragraph 2.71.
Torque wrench, 0 to 175 Ib-ft (Item 132, Appendix D)
Torque wrench, 100 to 500 Ib-ft (Item 133, Appendix D)
Materials/Parts:
Cleaning cloth (Item 6, Appendix B)
Electrical insulating varnish (Item 38, Appendix B)
Hydraulic fitting sealant (Item 26, Appendix B)
Machinery wiping towel (Item 37, Appendix B)
Protective caps (Item 3, Appendix B)
Sealing compound (Item 30, Appendix B)
Tags (Item 34, Appendix B)
Thread locking compound (Item 13, Appendix B)
Thread locking compound (Item 14, Appendix B)
Thread locking compound solvent (Item 32, Appendix B)
Tie wraps (Item 36, Appendix B)
Cotter pins
Clamp
Gasket
Lockwashers
Self-locking nuts
Self-locking machine screws
Spring pins
NOTE
The following illustrations show right
hand extension screed components
only. The left hand extension screed
is a mirror image of the right "2 hand
extension
screed.
All
removal
procedures are the same, unless
otherwise indicated.
GO TO NEXT PAGE
2-892
