TM 5-3895-373-34
2.63
REPLACE AND ADJUST AUGER/CONVEYOR DRIVE CHAIN.
This task covers:
a. Remove
b.
Clean
c.
Replace
d.
Adjust
e. Install
INITIAL SETUP
Tools:
Personnel Required:
General mechanic’s automotive tool kit
Two 62B construction equipment repairers. Second person to
(Item 106, Appendix D)
operate auger/conveyor controls.
Cleaning brush (Item 12, Appendix D)
Combination wrench (Item 116, Appendix D)
References:
Crowfoot wrench (Item 127, Appendix D)
LO 5-3895-373-12
Torque wrench (Item 132, Appendix D)
TM 5-3895-373-10
TM 5-3895-373-24P
Materials/Parts:
Cleaning cloth (Item 6, Appendix B)
Equipment Condition:
Cleaning solvent (Item 31, Appendix B)
Screed fully lowered per TM 5-3895-373-10.
Electrical insulating compound (Item 10, Appendix B)
Steps removed per TM 5-3895-373-20.
Grease (Item 18, Appendix B)
Rear top right access door open per TM 5-3895-373-10.
Thread locking compound (Item 13, Appendix B)
Rear top left access door open per TM 5-3895-373-10.
Thread locking compound solvent (Item 32, Appendix B)
Detachable chain link
Master chain link
GO TO NEXT PAGE
2-861
